KNOW MORE INDUSTRY NEWS & KNOWLEDGE

Back to Overview

The Bottom Of Crawler Track Maintenance Cannot Be Ignored

Aug 28,2020

The bottom of crawler track maintenance can not be ignored

 

The life of crawler track often depends on reasonability of tightness and adjustment degree. 

So, the deflection of upper crawler should be always checking. 

 

The method of inspection is:

First, sweep the crawler tracks clean, put a wooden wedge on the top after driving wheel 

Then. to make the crawler start walking, and squeeze the wooden wedge, so that the lower end of the crawler (close to ground) is tensed. The upper crawler will have deflection. 

The deflection normally is 8-15mm if you use a ruler to measure it.

 

image

 

The tensioning device of crawler is composed of oil cylinder, tensioning beam and tensioning spring.

The tensioning method is to use a high pressure oil gun to inject calcium based grease into cylinder from the nozzle, push the pistion, and then push the driving wheel to mobe through the tensioning beam to achieve track tensioning. 

When relaxation is required, slowly rotate the oil filling valve counterclockwise to loosen it and the greese will be discharged from the drain.

Note: if the left and right side of the track droop is different. the track will run off when walking.

 

 

Our company specialized in crawler crane undercarriage parts with high quality to make sure your crawler crane maintenance and replacement smoothly

 

IMG_20161122_155808_副本

 

 

Do you have any questions concerning our parts?

It will be very happy to help you with information and advice. We aim for supplying high quality parts to each customer and do the best custom solution for every customer.

Your satisfaction is our pursuit.

Please feel free to contact us for information or advice.

info@crawlercranesparts.com

Keyword:

crawler track

undercdarriage part

crane maintenance

Related Products

There is no relevant data for the time being, please add it backstage!